April fool's day can be joked
but the product quality must not be "stupid"
the quality of craftsmanship is not stupid
Jin lang technology & April fool's day
special ⑥ on time
01 industrial and commercial energy storage project integration is too complicated?
jinlang 125kW four-in-one industrial and commercial energy storage inverter integrates MPPT, PCS, parallel/off-grid and generator switching (STS) and EMS energy management into the same control system, completes standardized integration and joint adjustment from the factory, and is ready to use when power is supplied to the station. IP66 outdoor protection is adopted and it can operate continuously in harsh environments such as sandstorm and rainstorm.
in addition, unify the algorithm and control timing, reduce cross-equipment joint control delay and interlock failure, deliver faster, respond more quickly and the system is more stable; EMS uniformly dispatches batteries, photovoltaics and loads/power grids/generators, supports strategy issuance, remote operation and maintenance, and fault self-healing-leaves complexity in the factory and brings reliability to the site.
02 Does the device age in a few years?
the traditional "battery PCS integrated cabinet", because Pack and PCS modules are superimposed with cabinet and heat source, temperature/humidity/dust are more likely to affect service life under IP21 or IP54.
Jin lang 125kW four-in-one industrial and commercial energy storage inverter control system is separated from the battery and is far away from each other's "thermal influence"; The control system supports IP66, is directly installed outdoors, is not afraid of sun and rain, and its reliability and service life are directly stepped up.
03 It is limited to change batteries and expand capacity in the later period?
jinlang 125kW four-in-one industrial and commercial energy storage inverter adopts wide voltage range design, has been adapted to more than 100 battery brands in the world, and can be compatible with diesel generators of any local brand. The control system and battery cabinet are independently certified in major markets. The control system can quickly enter various markets with one certificate in hand, and can be installed and used immediately after on site access.
Compared with the traditional battery-PCS integrated cabinet, which requires the whole machine to be bound to a single brand and repeated system-level certification, which is time-consuming and costly, the solution significantly reduces docking and certification costs by modularity and independent compliance, frees up the freedom of project selection and accelerates delivery to the ground.
